Dymond D60

The Dymond D60 is also packaged as the Ripmax SD150, Protech B109 & Topaz 9mm. This servo is the choice of most flyers for the outboard Aileron servos & has been used with good results. The servo is 9mm thick with 1.8kg/cm torque which is extremely good for its size. There have been reports of the odd servo not centering correctly, this is something to check when you purchase & before installing into your wing.

Supertec NARO+F HP/BB

The servo is also packaged as GWS +F/BB. This servo is very reliable, precise, powerful & very fast. This is my choice for elevator servo in my Jibe models. Ailerons have two servos so reliability is not quite so important. Elevator servos are the most used servo in pylon racing so you need one that is durable for the task at hand. This servo is bull raced, has 1.7kg/cm torque & a fast speed of 0.1 sec/60degrees which is vital in getting those No.1 turns as close to the pylon as possible. This servo is a little taller than the normal micro servos so this is something to consider if you have a very small fuselage.